 |
|
 |
Enables to exchange tips automatically by using robots.
Any perplexing air / electrical wiring are not necessary, the only one connection
with robot is electrical signal for confirmation of the cap tip removal.
It was developed on the theme of price reduction and ecology.
|
 |
|
 |
 |
●Dimensions 157×57×100 ●Weight 1.8Kg（×2pcs） ＝ 3.6Kg
※Requires minimum 6 mm gap between shank and tip. One unit each for upper
and
lower electrode, alternatively a 180 degree rotation of weld gun for a single unit
application. |
1. To remove cap tips, just move the robot up and down.
2. Easy teaching capability.
3. The unit can be used for φ13 or φ16 tips only by changing the lever head.
4. Minimal gun throat depth capability.
5. Removed caps collected in appropriate container. |
◆Click here.
* It is necessary to install the reproduction environment of movie.
|
 |
|
 |
 |
●Dimensions 126 x 75 x 32 ●Weight 1.8Kg
|
1. Tip removal achieved without electrode / shank gap requirement.
2. 30 to 45 degrees of movement releases taper lock.
3. Both upper and lower tips removed with single unit.
4. Easy teaching capability.
5. The unit can be used for φ13 or φ16 tips by changing the internal rollers.
6. Removed caps collected in appropriate container.
|
◆Click here.
* It is necessary to install the reproduction environment of movie. |
|
 |
 |
 |
1. Non-power source spring drive provides stable tip supply.
2. The cartridge can be exchanged and replaced easily.
3. 13 / 16 / 20 diameter of electrodes accommodated by changing the cartridge.
4. Sensor detects the last tip in the cartridge.
5. Correspond to both of N type and T type Eco Changer.
|
